How to Compute Electricity Consumption (Watts to kWh to Pesos)

Published 2026-07-05 · By TipidKuryente Editorial · Calculator figures use the sourced dataset

Every “magkano ba ang kuryente ng…” question comes down to the same formula. Once you know it, you can check any claim, any energy label, any tita’s advice and any website, this one included.

₱ per month = watts × hours per day × 30 ÷ 1,000 × rate

Convert watts to kilowatts, multiply by hours to get kWh, then multiply by the rate to get pesos. The current Meralco rate is ₱15.5510/kWh for November 2026, updated monthly on our rate page.

Try it on a stand fan: 60 W, ten hours a day. 60 × 10 × 30 ÷ 1,000 = 18 kWh, times ₱15.55 ≈ ₱280 a month. That’s all there is to it.

The hard part is finding the real watts

Where do you get the actual wattage? From most reliable to least:

  1. A plug-in power meter (₱500–₱900 at the hardware store). It reads what the appliance actually draws, including the compressor switching on and off. It’s the only way to settle the inverter vs non-inverter argument with real data.
  2. The yellow energy label on newer units, which gives kWh per year in standard tests. Divide by 12 for a monthly figure.
  3. The nameplate, as long as you remember it’s a maximum. Kettles and flat irons really do run at their nameplate watts. Refs and aircons average far below it, because their compressors take breaks.
  4. Tables of typical values like our PH appliance wattage reference, built from realistic averages for models sold here.

The two mistakes everyone makes

Working out a ref’s cost from its nameplate watts. A “200 W” ref averages 60–120 W depending on its age and type, so a bill worked out from the sticker comes out about double, and people panic over nothing.

Forgetting standby power. The router (₱112/month, always on), the TV on standby, the chargers left in their sockets. Each one is barya, but together they’re a small charge you pay every month.

Or skip the arithmetic entirely

The appliance electricity calculator uses this same formula with current rates and realistic wattages for appliances sold here. Add up your household, look at the total, and find the two appliances behind most of your bill. If the total calls for bigger changes, the solar math starts from that same number.

Sources